Other Settings

This page is to make other common settings.

There are selection of tangent controls, clipping of SDI output, monitor calibration of PC screen.

Please refer to Setting Dialog explanation too.

①Selection of Control Panel Devices

Use Tangent Devices

Please check this when you are going to use Tangent Control Devices. You have to install Tangent Hub.

Tangent controls can be assigned to different LUTBOX devices, or just just apply the parameters for active LUTBOX only.

If you are going to use latter method, please check  "Use Tangent for ActiveTask" radio button.

②Device Output Limitation

If the output value exceed the specification of the standard, the deveices receiving HD-SDI signal might do mulfunction. To avoid that, you can limit the range of the LULTBOX output. 4-1019 is the recommended setting.

③PC Screen Monitor's Calibration

By selecting the ismon file which is created by monitor calibration of PC screen monitor, you can adjust the still image color to correct color reproduction as mastering monitor.

④Keep Look function while Look Sync

It will decide the behavior of "Keep Look" when using Look Sync function.

If you selected "Save Current Look Only", only the active device's look will be saved.

If you selected "Save all Looks on Look Sync", all of the synced devices's looks will be saved. But if the device was set as "exeption of keep look when look syncing", the look of the device will not be saved. You can achieve proper behavior by combining both settings.

⑤Selection of CDL only Mode

If this setting is checked, the color correction function will be limited to ASC-CDL parameters only. Regarding LUTs, only the local LUT is available, no CloutLUT, no color space conversion. All of the color management function will be stopped. This mode is useful for on-set which requires to create look only by ASC-CDL parameters.

⑥Use Input Scaling Option

If this setting is on, you can select input signal scaling(Legal to Full or Full to Legal) for all of the workflow.

Even if this setting is off, the selection will be automatically available so please keep it off in normal cases.

⑦Proxy server settings

If you are using proxy server, please use this settings. WonderLookPro is using WOWOW server internally to manage licenses and download LUTs.